boooom.. Hull mold complete.

Gel coat and reinforcement lam smashed on during the hottest day of the year so far!!! Gel times 8 minutes, had to go like hell!! Got the mold of the pattern tonight, a bit sticky but all good, it will need a PVA release agent as I am going for a super light carbon epoxy layup 😁🤙🏴󠁧󠁢󠁷󠁬󠁳󠁿.

Water based clear coat is on, more sanding now required, starting 800 wet, then 1200 and finally 1500 grit then machine polished with extra fine compound, time on this plug is 27 hrs to this point, huge amount of work creating moulds.

14 foot hollow carbon sup project. All glassed and host coated, working through the grits on the sander, 3 passes finishing at 500 grit, next step is the red fine surface filler finished at 800 grit ready for clear coat.

14 foot hollow carbon sup project, tail shaped in and spackled, ready for some 6oz glass and a fill coat.

14 foot hollow carbon sup, just started refinishing the extended tail.

14 foot hollow carbon flat water Sup project, this is the start of the plug making process, I chose this board as I know it to be a quick hull and modifying the tail as in the photo will I hope make it better, (tracking).